Laguna Revo 24|36 Lathe
Part No. 24/36REVO
The Laguna 24|36 Lathe is a woodturning lathe similar to the REVO 18|36. It is a bigger version, increasing the bowl turning capacity to a massive 610 mm diameter over the bed.
Features
- Ergonomic panel with controls mounted
- Anodised aluminium plate
- Speed indicator
- Solid bed
- Headstock, tailstock and tool rest made from cast-iron
- All cam lock levers equipped with soft grip handles
- Cast iron floor stand
Supplied with:
- 2MT four prong drive centre
- 2MT revolving tail centre
- 75 mm diameter faceplate
- Knock-out bar
- Onboard storage for accessories
- 8 m power cable with industrial 16-amp plug
Product Details
The Laguna 24|36 Lathe is equipped with is an ergonomic panel with controls mounted in an anodized aluminium plate. The speed is smoothly controlled with a tactile rubber augmented knurled aluminium dial. In addition to the headstock control panel, the 24/36REVO has a secondary control panel which you can choose to mount onto the right-hand end of the bed or onto the tailstock.
The solid bed, with an impressive width of 208mm, is made of high-quality steel ASTM A36 (tougher than cast iron), and is precisely ground providing smooth travel of the headstock, tailstock and tool rest. The spindle is run by a highly efficient induction motor with a VFD frequency convertor for high torque even at lower speeds. The speed range can be changed with a clever one-lever mechanism.
The headstock, tailstock and tool rest of the lathe are made from cast-iron securing minimum vibration and high comfort for turning of over sized pieces. Tailstock and Headstock cam lock levers are placed on the back of the machine and will not get in the way. All cam lock levers have soft grip handles and a long length resulting in a firm feel with no deflection.
A redesigned banjo features more compact design, 45˚ cut out, wider base, increased eccentric rod diameter and larger hanger resulting in a more solid feel when locking in place.
The cast iron floor stand has had the material thickness increased by 80%, over the 18/36REVO, to handle the extra weight and stability requirement.
A further upgrade is the front bearing which has a 30% higher load rating than the standard bearing.
Optional Accessories
- Swing Away Tailstock
A fast and convenient way to move the tailstock out of the way is this hinged extension bed, which can quickly be unclipped and swings the bed and tailstock away.
- Heavy Duty Wheel Kit
Attaches to each end of the floor stand. With foot lever action, assisted by a gas strut to take the weight, moving this heavy lathe around is a breeze.
- Comparator
The comparator set is a method of mounting a spindle to be copied so that it sits at eye level. The work piece can then be easily compared to the template.
- Halogen Flood Light
Dust proof ribbed aluminium case, swivels 320 degrees and provides bright glare free illumination on the work piece.
Spare Parts
Purchasing spares,
made easy.
Technical Specification
Motor | 2200 W 3 hp 3 phase output |
Power Supply | 220-240 V 50 Hz 1 phase |
Recommended Breaker | 16 Amps |
Swing over bed | 600 mm |
Swing over Banjo | 490 mm |
Swing with optional Expansion Set | 800 mm |
Distance between centers | 910 mm |
Between centers with optional Expansion Set | 1410 mm |
Speed Range - Low | 50-1300 RPM |
Speed Range - High | 135-1350 RPM |
Drive Belt | Poly-Groove Drive Belt with quick change |
Toolrest Length | 305 mm |
Tool Rest Stem Diameter | 25.4 mm |
Tool Rest Leading Edge | Hardened Steel |
Headstock Spindle Taper | 2MT |
Headstock Spindle Thread | M33 x 3.5 mm (Right Hand) |
Headstock Spindle Through Bore | 9.5 mm |
Headstock Spindle Indexing | 14/36/48 positions with lock |
Headstock Front Bearing | TPI Taiwan 6207LLU |
Headstock Rear Bearing | TPI Taiwan 6205LLU |
Tailstock Taper | 2MT |
Tailstock Quill Taper | 114 mm Self Ejecting |
Tailstock Through Bore | 9.5 mm |
Faceplate Diameter | 75 mm |
Floor to Spindle Centre | 1130 mm |
Assembled Dimensions (W x D x H) | 1524 x 660 x 1327 mm |
Shipping Dimensions (W x D x H) | 1540 x 690 x 650 mm |
Weight (Net/Ship) | 254 kg/266 kg |
Manufacturers Warranty | 1 year |
Assembly Time | 2 hours (requires 2 people) |