Abicor Binzel xFUME® PRO Fume Extraction Torch
Part No. 612.0127.1
The xFUME® PRO extraction torch line is extremely lightweight and handy. With these fume extraction torches it feels as if you are holding standard MIG torches or standard MAG torches in your hand. The xFUME® PRO fume extraction torch line is easy to handle and have a comparatively slim front end, ensuring a good view to the process.
- Highly efficient welding fume extraction
- Improved ergonomics and noticeable weight reduction
- Slim front end
- Optimised shielding gas cover
- Improved ergonomic handle
- Unique balance of torch neck to cable assembly
When welding with a xFUME® PRO fume extraction torch in combination with a mobile xFUME® extraction unit such as the xFUME® ADVANCED, the FES-200 W3, FEX Pro as well as the FEC W3, there is also no risk of unintentionally extracting shielding gas. With the xFUME® PRO extraction torches and the correct adjustment to the welding fume extraction unit, optimum shielding gas coverage is guaranteed at all times.
Product Details
The fume extraction torches xFUME® PRO from ABICOR BINZEL are part of a high vacuum system, in which a low volume flow passes at high negative pressure. Compared to a low vacuum system, the static pressure as well as the velocity of the extracted air is higher.
The welding fumes produced in the process are collected and conveyed through the extraction hose into the mobile extraction unit. The integrated filter ensures that dirt particles are collected and retained and clean air is returned to the environment.
With extraction at the source, as with the xFUME® PRO extraction torches, between 90 % and 99 % of harmful particles are absorbed and filtered out – depending on the torch position. However, with extraction at the source there is often the concern that too much inert gas is extracted. In order to be able to adjust the extraction rate more precisely, the handle of the xFUME® PRO fume extraction torches is equipped with an easy-to-operate external air slider control. Thus, in combination with a suitable mobile fume extraction unit, sufficient protective gas coverage is guaranteed at all times.
Spare Parts
Purchasing spares,
made easy.
Technical Specification
Type | xFUME® PRO 24 | xFUME® PRO 36 | xFUME® PRO 501 |
Cooling | air cooled | air cooled | liquid cooled |
Rating | |||
CO2 | 270 A | 330 A | 500 A |
Mixed gases M21* | 250 A | 300 A | 450 A |
DC (%) | 60 | 60 | 100 |
Wire Ø (mm) | 0.8 - 1.2 | 0.8 - 1.2 | 1.0 - 1.6 |
Volume flow m3/h | |||
Extraction nozzle | 70 | 58.7 | 58.7 |
Connector | 92.8 | 75.8 | 81.3 |
* according to DIN EN ISO 14175