Schuko Vacomat 300 XP
Part No. 623010
Schuko Vacomat 300 XP Mobile dust extractor
Large dust extractor with four chip collection tanks.
- Extraction centre for powerful multi-point extraction
- Can be combined with various chip discharge systems
- Tested safety – H3 and GS test marks
- Energy-saving low-noise operation
- Delivered preassembled and ready to plug in for immediate use
The Schuko Vacomat 300 XP large dust extractor is the ideal dust extraction system for multi-machine extraction. Airflows of up to 6,000 m³/h are possible with this clean air extraction system, making it also interesting for CNC machines or wide belt sanders.
The standard Vacomat 300 XP comes with an automatic controller to ensure that the powerful extraction system is not forgotten or run at no load. If an attached machine is turned on, the dust extractor fan starts automatically, causing extraction to begin immediately.
Our Vacomat 300 XP is modularly constructed. In the standard version the dust and chips are discharged to four dust-tight plastic sack-lined chip collection tanks (4 x 120 l). A negative pressure duct holds the film sacks in place in the collection tank. Inspection windows facilitate level checking.
Service & Support For
Dust & Fume ExtractionFind out more
|Art. no.||623 010|
|Suction nozzle Ø (mm)||300|
|Maximum flow rate (m³/h)||5,950|
|Nominal volume flow at 20 m/s(m³/h)||5,089|
|Suction pressure (pa)||2,760|
|Filter surface area (m²)||32|
|Sound pressure level (dB[A])||74|
|Chip collection volume capacity (l)||4 x 120|