Part No. 1060147-1558
Self-extinguishing inline pre-filter for added safety and protection from fire.
In the event that a burning ember is drawn into the fume extraction unit, there is the possibility that hot debris in the filters could ignite. Although any resultant fire would typically be retained within the fume extraction unit, this would cause significant damage and in extreme circumstances the risk may extend beyond the extraction unit. For processes where such risks have been identified, additional protection in the form of an in line FireBOX is an additional precaution.
The built in temperature controller can be set so when a 10°C (18°F) temperature rise over the pre-set ambient temperature is detected, the FireBOX GA will activate the isolating valves and switch off the power to the extraction unit, suppressing the airflow to the FireBOX and reducing the fire. If the temperature rises another 10°C (18°F) then the fire extinguisher will be activated.
Independent tests by Ordnance Testing Solutions Ltd found the FireBOX GA contains and suppresses fires consisting of burning polymer particulate. The FireBOX GA is designed for general applications and is not for use on metal-based applications.
Service & Support For
Dust & Fume ExtractionFind out more
|Dimensions (HxWxD)||1185 x 495 x 640mm (including beacon)||46.65 x 19.48 x 25.2” (including beacon)|
|Cabinet construction||Brushed stainless steel||Brushed stainless steel|
|Airflow||Up to 500m³/hr||Up to 294cfm|
|Electrical data||115-230v Single -phase 1~ 50/60Hz||115-230v 50/60Hz|
|Max load current: 13 amps||Max load current: 13 amps|
|Approvals||UKCA and CE|
Deeppleat Duo Pre-Filter Specifications
|Surface media area||12m² approx (129.12 ft²)|
|Filter media construction||Pleated with glue bead spacers|
|Filter housing||Zintec mild steel|
|Filter efficiency||95% @ 0.9 microns|