Bofa T30A - Tip Solder Fume Extraction Unit
Part No. E2142A
The Bofa T30A Tip Solder Extraction System for sup to 30 user workstations. Featuring advanced technologies and an efficient internal filter system whilst maintaining low noise levels and a small footprint. This unit features a vairable power supply which will automatically adjust to match the voltage of mains power between the ranges of 90-257V.
The Bofa T30A - Tip Solder Fume Extraction Unit is a high vacuum unit which has been designed to extract and filter fumes and debris through small bore hoses. Ideally suited to hand soldering iron tip extraction, the unit will protect up to 30 operators. The unit can also be used for Vac pens and any application requiring close proximity, micro extraction.
Automatic flow control comes as standard. This allows the unit to be set to the optimum flow rate to suit the number of operators connected to the system. The unit will then maintain the set airflow over the life of the filters ensuring maximum protection to the operators.
- Automatic flow control
- Reverse flow
- ‘Easi-Seal’ filter location
- Small footprint
- Low noise levels
- Brushless motor
Service & Support For
Dust & Fume ExtractionFind out more
|Dimensions (L x D x H)||430 x 430 x 720 mm|
|Cabinet Construction||Brushed Stainless Steel / Powder coated mild steel|
|Flow Rate with filters fitted (per tip)||22-30 L/M|
|Electrical Data||90-257v 1ph 50/60 Hz|
|Full load current: 7.3 amps / 1.1 kw|
|Noise Level||< 68 dB(A)|
|Pre Filter Efficiency||F7 (85% @ 0.8 microns)|
|HEPA Filter Efficiency||99.997% @ 0.3 microns|
|Gas Filter||Treated Activated Carbon|